Design Optimisation and Efficiency Analysis of a Groundnut Oil Expeller's Kneader
R. O. Adekunle *
Department of Agricultural and Environmental Engineering, Federal University of Technology, Akure, Ondo State, Nigeria.
J. B. Owobayi
Department of Agricultural and Bio-Environmental Engineering Technology, Federal College of Agriculture, Akure, Nigeria.
J. Isa
Department of Agricultural and Environmental Engineering, Federal University of Technology, Akure, Ondo State, Nigeria.
J. A. Olabiyi
Department of Agricultural and Environmental Engineering, Federal University of Technology, Akure, Ondo State, Nigeria.
A. Ajide
Department of Agricultural and Environmental Engineering, Federal University of Technology, Akure, Ondo State, Nigeria.
J. O. Ogunjimi
Department of Agricultural and Environmental Engineering, Federal University of Technology, Akure, Ondo State, Nigeria.
S. A. Olaleye
Department of Agricultural and Bio-Environmental Engineering Technology, Federal College of Agriculture, Akure, Nigeria.
*Author to whom correspondence should be addressed.
Abstract
The kneader unit of a groundnut oil expeller was optimised using a central composite design to evaluate the influence of feed rate, barrel temperature, pressing time and extraction speed on machine performance. The study focused on the conditioning function of the kneader, which mixes, heats and prepares groundnut kernels before mechanical expression. Freshly harvested Ex-Ife groundnuts were cleaned, sorted and processed under defined operating conditions. Oil yield, extraction efficiency, extraction loss, throughput capacity and energy consumption were used as response variables, and the experimental data were analysed through analysis of variance, regression modelling and desirability-based optimisation in Design Expert version 13. The results showed that oil yield varied from 30% to 70%, while extraction efficiency ranged from 28% to 81%, depending on the operating conditions. The highest observed oil yield of 70% was obtained at a feed rate of 10 kg/h, screw speed of 66.26 rpm and barrel temperature of 96.89 °C. The minimum extraction loss of 19% was obtained under the same operating region, indicating that moderate feeding and adequate heating improved oil release. Specific energy consumption ranged from 3.0 to 16.1 kWh/kg, with lower energy demand associated with more efficient operating conditions. The desirability-based optimum was obtained at a feed rate of 10.22 kg/h, barrel temperature of 107.14 °C, screw speed of 200.89 rpm and pressing time of 24.95 min, giving predicted responses of 48.75% oil yield, 63.61% extraction efficiency, 35.61% extraction loss and 7.29 kWh/kg energy consumption. Overall, the optimised kneader provided a practical operating window for improving groundnut oil extraction performance in small- and medium-scale processing.
Keywords: Groundnut, Arachis hypogaea, oil expeller, kneader, central composite design, extraction efficiency, oil yield, feed rate, barrel temperature, energy consumption, response surface methodology